|
S
M C clock design
The
most important design characteristics of my clocks (Name S M C)
are to be seen in the expensive and heavy housings, which allow
due to their strong housing walls quite different designs in contrast
to simple metal frame housings.
Now it is the first time to realize these extraordinary housing
designs in the wall clock`s branch. They are a real novelty because
up to date they have not been realized due to high production costs.
Further design features are the spaceous dimensions of dial plates,
indicators and indices. Symmetrical and plain forms play an important
role in my clock style.
All components of my clocks are produced in expensive single piece
production by manual work, the housings, dial plates partly, the
indices, the indicators, bores, clock glasses partly; except the
clock movements.
Quality
My
clocks are styled with great passion and later carefully manufactured
in this sense. Due to their heavy and compact construction as well
as their successful design these clocks are valuable.
Housings
The
clock housings consist in general out of two parts, the housing
ring and the case cover.
Materials
As raw material for my clock housings there is optionally used aluminium,
brass or copper. Except the quartz movement no plastic parts are
used.
Possibilities
of galvanizing
For
the clock housings there exist the following kinds of galvanizing
:
-
gold plating (fine gold and yellow gold)
- silver plating
- nickel plating
- platin plating
- rhodium plating
Dial plates
I
offer metal dial plates with furnish of the following precious woods:
-
mahagony
- walnut
- oak
- beech
Clock movements
As standard I use high quality quartz movements. On demand
there can also be assembled (if suitable) :
-
radio controlled movements
- synchronic movements
- mechanical movements
Manufacturing
time
Depending
on the clock`s type the manufacturing time varies between 10 and
30 working hours.
Suspension
on the wall
I
recommend to use dowel pins S6 or S8 for wall suspension, to be
on the safe side, because of the considerable weights.
Weights
The
weight of these metal wall clocks amount from 1,2 kg / pc up to
4,5 kg / pc.
Adjustment
of indicators
On
the reverse side of each clock there is located a hole. By means
of a screw driver you can easily set the desired time.
Replacing
battery cells
The
casing cover is, depending on the type, fixed with two or three
slotted screws M2. They should be solved, remove the casing cover,
replace the battery cells and fasten the casing cover again.
|
